Advertisement
INSTALLATION METHOD
This is an anti-theft installation method.
The main unit has a METAL MOUNTING SLEEVE.
Please connect the wiring, eg, the Power Supply, the Speakers and the Antenna
according to the requirements of this Instruction Manual, then install the metal
mounting sleeve into the car as per the diagram illustrated below.
METAL
SUPPORT STARP
DASHBOARD
METAL MOUNTING SLEEVE
To remove the unit out of the metal mounting sleeve,
insert the two supplied KEYS into the left and right side
slots of the chassis at the same time. Then pull the chassis
out of the metal mounting sleeve as shown in the right
illustration.
NOTE
Before mounting and operating
the player, remove the metal
mounting sleeve illustrated by
the arrows.
For optimum anti-skip capability of the unit,
please ensure the metal support strap is
bolted firmly to the car chassis.
RESET BUTTON
Push this RESET button with a sharp-pointed
object to restore any distortion in sound or
operation problems.
UNIT CHASSIS
To attach the removable faceplate, insert the left
side of the faceplate into the left of the chassis first.
Then push the right side of the faceplate into the
chassis until you hear it "click".
To remove the front panel from the unit
chassis, press this key to release the
front panel from the unit chassis, then
pull it up a little to take out from the
unit chassis.
Page 6
Bend the tabs on the metal mounting
sleeve against the DASHBOARD with
a screwdriver.
PLASTIC TRIM RING
FRONT PANEL
Advertisement
