Download Print this page

Troubleshooting - Caliber RMD 210 Instruction Manual

Advertisement

TROUBLE SHOOTING
Before using the check list please make all the connections first.
If you still have questions after going through the checklist, please consult
your local customer service representative.
Common Symptoms
There is no power.
There is no sound.
The operation keys
do not work
No radio reception.
In automatic search
mode the radio does
not stop at a trans-
mitting station.
Cause
The car ignition is switched off.
The fuse has blown.
The volume control is set too low.
The device has not been correctly
connected.
The built-in microcomputer is not
operating properly due to noise
The antenna cable is not connected.
The transmission signals are too
weak.
If the power supply is properly connected to
the car accessory, switch the ignition key to
"
ON
"
or " ACC
Replace another fuse according to the wiring
diagram.
Turn up the volume properly.
Check the power and earth connection
according to the wiring diagram.
Switch the device off and on again. Or press
the RESET button to resume the program.
Insert the antenna cable firmly into the
antenna socket of the device.
Tune in to a radio station manually.
Page 7
Solution
" .

Advertisement

loading