Safety Precautions - Promotech BM-16 Operator's Manual

Bevelling machine
Table of Contents

Advertisement

2. SAFETY PRECAUTIONS

1. Before beginning, read this Operator's Manual and complete proper occupational
safety and health training.
2. Use the machine only in applications specified in this Operator's Manual.
3. The machine must be complete and all parts must be genuine and fully operational.
4. The specifications of the power source must conform to those specified on the
rating plate.
5. Never carry the machine by the cord and never pull the cord because this may
damage it and result in electric shock.
6. Untrained bystanders must not be present near the machine.
7. Before beginning, make sure that the correct is the condition of the machine,
power source, power cord, plug, control components, and milling tools.
8. Keep the machine dry. Exposure to rain, snow, or frost is prohibited.
9. Keep the work area well lit, clean, and free of obstacles.
10. Never use near flammable liquids or gases, or in explosive environments.
11. Use only tools specified in this Operator's Manual.
12. Never use tools that are dull or damaged.
13. Install the cutting inserts and milling head securely. Remove adjusting keys and
wrenches from the work area before connecting the machine to the power source.
14. Never use the machine in upside down position with the milling head facing up.
15. If the cutting edge of the insert is worn, rotate the insert in the socket by 90° or
180° or, if all possible to use edges are worn, replace with a new insert specified in
this Operator's Manual.
16. Before every use, inspect the machine to ensure it is not damaged. Check whether
any part is cracked or improperly fitted. Make sure to maintain proper conditions
that may affect the operation of the machine.
17. Always use eye and hearing protection, non-skid footwear, and protective clothing
during operation. Do not wear loose clothing.
18. Using the spindle lock button while either operating the machine or removing the
milling head is prohibited because this may damage the machine.
19. Do not touch moving parts or metal chips formed during milling. Prevent objects
from being caught in moving parts.
Copying, using, or distributing without permission of PROMOTECH is prohibited.
This document is protected by copyrights.
6
BM-16

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents