Promotech BM-16 Operator's Manual page 7

20. After every use, remove metal chips from the machine, especially from the milling
head. Never remove chips with bare hands. Clean the machine with a cotton cloth
without using any agents.
21. Cover steel parts with a thin anti-corrosion coating to protect them from rust when
not in use for any extended period.
22. Maintain the machine and install/remove parts and tools only with the machine
unplugged from the power source.
23. Repair only in a service center appointed by the seller.
24. If the machine falls from any height, is wet, or has any other damage that could
affect the technical state of the machine, stop the operation and immediately
send the machine to the service center for inspection and repair.
25. Remove from the worksite and store in a secure and dry location when not in use.
Copying, using, or distributing without permission of PROMOTECH is prohibited.
This document is protected by copyrights.
7
BM-16