Advertisement
Cleaning the surface of the touch panel
(a) Clean the surface of the touch panel using a
commercially available lens cleaning cloth
(non-woven rayon cloth
etc.).
(b) If necessary, use a piece of soft cloth
moistened with water or neutral detergent and
then tightly wrung out.
6
Cleaning the system, main panel, and transducer connector
7
To clean the trackball
(a) Wipe the system using a soft cloth moistened
with mild detergent.
(b) Clean around the switches or keys on the
main panel using cotton buds.
(c) Wipe the transducer connector with a soft, dry
cloth. If it is difficult to remove all the stains
with a dry cloth, use a soft cloth moistened
with
water.
(a) Turn the trackball ring in the direction of the arrow in the left figure below and
remove it together with the trackball.
Turning the ring unlocks
NOTICE:
To prevent malfunction, be careful when removing the ring
.
II.I~ 'JC77'1
-1 A -1
Cll.l*I I
Advertisement
