Pneumatic Panel - Emerson Dosaodor-D V

Dosaodor-D

Pneumatic Panel

Material
Installation
Weight
Overpressure relief valve
Electrical protection
Material electrical protection
Mechanical connections
Maximum working pressure
Odorant flow rate
Temperature
Calibration cylinder specifications
The calibration cylinder tank is delivered already installed in
the Dosaodor-D pneumatic panel (key 8 - figures 2 and 3).
The pneumatic panel has been designed to hold calibration
cylinder tank weight.
Maximum Allowable Pressure (PS) : 100 bar (1450 psi)
Hydrostatic Test Pressure (PT)
Maximum working pressure
Body material
Volume
Connections
Solenoid valves specifications
Maximum working pressure
Body material
Gasket material
Valve operation
Power requirements
Pressure stabilizer filter SA/2 specifications
Maximum working pressure
Body material
Gasket material
For the operation and maintenance of the pressure stabilizer type SA/2 please see the Instruction Manual D103653X012-SA2-IM.
4
: 20/10 mm stainless steel plate
: Wall mount
: 25 - 45 kg (55 - 100 lbs) (based on configuration)
: Stainless steel with following rating options
14 bar (203 psi) - 38 bar (551 psi) - 60 bar (870 psi)
: Explosion proof and intrinsically safe
: Available for European and North American standards
: Odorant inlet and discharge
DN 1/4" double ferrule fitting for DN 6x1 pipe
Gas inlet and discharge
DN 1/4" single ferrule fitting for DN 8x1 pipe
: Supply 100 bar (1450 psi)
Injection 14 bar (203 psi) - 38 bar (551 psi) - 60 bar (870 psi)
: 0,5 - 14,0 l/h (0.89 – 24.97 Pound/h at 6.75 lbs/gal)
: Working -10 °C +60 °C
WARNING
!
: 150 bar (2175 psi)
: 14 bar (203 psi) - 38 bar (551 psi) - 60 bar (870 psi)
: Stainless steel
: 1.3 and 2 liters
: 1/4" NPT
: 14 bar (203 psi) - 38 bar (551 psi) - 60 bar (870 psi)
: Stainless steel
: FKM
: Electromagnetic
: 12 Vdc
: 100 bar (1450 psi)
: Steel
: Nitrile (NBR) rubber
Type PED Category
Dosaodor-D Article 3.3 - Cylinder 1"
Calibration Cat. II - Cylinders 2", 3"
Cylinder Tank Cat. III - Cylinder 4"
Fluid Group
1