ECU Connections and Configuration
The first operation is to create a connection between the
DosaLink Software and the ECU; in order to do this proceed
as follows:
a)
Click on the first icon on the left "Interface" placed at
the top of the DosaLink display, then from the menu
"Line Function" click on "Connection".
b)
If the serial cable has been connected to the right serial
port and if the configuration is correct, the DosaLink
Software detects the Configuration present on the ECU.
This operation is highlighted by the progress of the Blue
scroll bar placed in the centre of the screen.
Dosaodor-D
39