Campbell CR300 Series Application Note page 7

Cellular module firmware update

Hide thumbs Also See for CR300 Series:

8. Select the Settings Editor tab then Cellular. The PPP Authentication Username and PPP

Authentication Password fields, must not be used. If these fields contain information, you

will need to have Campbell Scientific update your module firmware, see

direct access to the data logger nor a copy of LoggerNet

9. Scroll to the Cell Diagnostic Info field.

The current version of the cellular module firmware is listed next to Brio Ver.

If it is greater than the version listed below, you do not need to update the module

firmware.

- CELL200: 1.1.11 or greater

- CELL205: 1.1.11 or greater

- CELL210: 2.00.101.06 or greater

If you don't have

(p. 15).

Cellular Module Firmware Update

Table of Contents