Advertisement
Assembling Mobile Base
1.
Attach swivel caster to each corner bracket
with (4) M8-1.25 x 16 hex bolts and (4)
M8-1.25 lock nuts (see Figure 4).
Corner
Bracket
Figure 4. Swivel caster attached to bracket.
2.
Install foot pedal plunger and spring into each
corner bracket (see Figure 5), and attach a
rubber foot (with M10-1.5 hex nut) to the bot-
tom of each foot pedal plunger.
Foot Pedal
Plunger
Figure 5. Installing foot pedal plunger and
spring.
T31566 Mobile Base (Mfd. Since 08/19)
Swivel
Caster
Spring
Rubber
Foot
3.
Attach foot pedal to each front corner bracket
using (1) M8-1.25 x 50 shoulder bolt and (1)
M8-1.25 lock nut (see Figure 6).
Foot
Pedal
Figure 6. Attaching foot pedals.
4.
Measure machine base footprint size.
5.
Arrange corner brackets in desired orienta-
tion. Choose orientation to ensure safe clear-
ance around base of machine, as well as
desired placement within shop.
6.
Slide corner brackets over ends of side rails
(see Figure 7). Position corner brackets so
inside opening is
width and length of machine base footprint.
Right Corner
Bracket
Inside
Opening
Left Corner
Bracket
Figure 7. Example of assembled mobile base
with inside opening slightly larger than machine
base to ensure easy fit.
⁄
"–
⁄
" larger than both
1
1
4
2
Front
-3-
Advertisement
