Record Schedule - CONCORD QV5200 Manual

Chapter 7 Record Setup

7.3.1 Record Schedule

Using this function you can access and change the default recording schedule. The Record Schedule is shown as a 7 day grid divided into 48 half
hour blocks for each day, you can select which camera you want to schedule by using the Channel drop down menu at the top. The various
recording triggers are shown as color coded rings; click inside the ring corresponding to the recording trigger you want to use and then drag the
cursor across the days and times you want to select, to deselect an area click or drag across on the cells or you want to remove in the same manner.
You can choose to record all three methods at the same time or separately, it is up to you to decide what best suits your needs. You can filter out
the trigger methods in the search and playback menus, however the more methods and times you select the more HDD space you will use.
There are three types of recording that you can schedule:
Normal – this is continuous recording and fills up your hard
drive the fastest.
Motion – this will only trigger a recording when movement
is detected by the camera within the defined Motion area.
PIR – this will only trigger a recording when an object that
has a different temperature to the back ground temperature
passes through the PIR beam.