CONCORD QV5200 Manual page 92

Chapter 9 Network Setup
9.3 Email
10. Test Email: To make sure all settings are correct, click
you received the test email, it means the configuration parameters are correct. Click "OK" to continue. If you do not receive the test email,
check your junk or spam folder.
Email not working? Please try the following:
1. Check that your email user name and password are correct.
2. Located at the back of your NVR, you should see one or two flashing LEDs (above the Ethernet port). If you don't see this, disconnect then
reconnect the Ethernet cable or try a different port on your router or try a different Ethernet cable.
3. If you are using a Gmail account and you are sure all the settings are correct and you haven't received an email or you have received an email
from Google with "Sign-in attempt was blocked" you will need to go to
"ON".
. The system sends an automated email message to your inbox. If
myaccount.google.com/security and switch "Allow less secure apps" to