CONCORD QV5200 Manual page 38

Chapter 6 Channel Setup
6.2.2 Channel Live Display Setup Menu
This meu allows you to configure how the cameras display themselves on screen, including name, date and colour
controls.
You can add a name to the channel numbers to identify each camera. Simply click in the Channel Name box and
type the name you want to use and click Apply.
You can change the camera protocol if you have a camera that you want to add to the network you can select
from four different AHD formats, TVI and CVI, this is only necessary if you are adding a non-Concord camera.
The EQ Level is usually best left at AUTO, however if you are running extra long cables you can select a specific
length for a better picture, if that is the cause.
If you want to hide the live image of a channel you can tick the Covert box, likewise if you want to hide the
channel name or the time from the live screen you can untick them on this screen.
Your Concord cameras will automatically adjust to the ambient light conditions, however you may still find you
want to adjust the hue, brightness, contrast and colour saturation. You can do this with the sliders at the bottom
of the menu and check the effect this has on the live image to the right.