CONCORD QV5200 Manual page 87

Chapter 9 Network Setup
9.1.2 General – Port Configuration
Web Port: This is the port that you will use
to log in remotely to the DVR when using
the Web Client. If the default port 80 is
already taken by other applications, please
change it.
Client Port: This is the port that the DVR
will use to send information through. If
the default port 9000 is already taken by
other applications, please change it.
RTSP Port: Default is 554, if the default
port 554 is already taken by other
applications, please change it.
UPNP: If you want to log in remotely to the DVR using the Web Client, you need to complete the port forwarding. Enable this option if your router supports
the UPnP. You need to enable UPnP both, on DVR and router, this will need to be done manually. If your router does not support UPnP, make sure the port
forwarding is completed manually.