CONCORD QV5200 Manual page 63

Chapter 7 Record Setup
7.5 Motion & PIR Alarm Setup
Channel: Channel number being setup.
Buzzer: Internal DVR audible buzzer will sound every time an alarm is triggered.
Record: Switches recording on for other channels and gives you the option to nominate on which channels to begin recording. This increases the chances of
capturing an identifying image of an intruder if you missed it on one camera, as another camera will already be recording if they come into its view.
Post Recording: Sets the length of time to record after an alarm. You can choose to record for 30 sec, 1 min, 2 min or 5 min after an alarm has been triggered.
Show Message: Show alarm icons on the live view screen.
Send Email: Send an email alert to the designated email addresses. Under "Network" settings there is an option to setup one to three email addresses. You can
choose to have an alert sent to these email addresses when an alarm is triggered through this menu.
Full Screen: Displays the full screen video feed of the triggered camera in Live View mode when alert is activated.
FTP Picture Upload / FTP Video Upload: Upload pictures or upload video captures using File Transfer Protocol. Although largely replaced by cloud servers these
days, some people may prefer to upload their alert pictures or alert videos using a FTP server, this can be set up in the Network settings menu.
Picture to Cloud / Video to Cloud: Upload recorded pictures or video captures to Dropbox. You can find details on how to set up a Dropbox account and link your
recorder to it can be found in the Device setup menu section of this manual.