Record Schedule - CONCORD QV5522 Manual

5.2.3 Record Schedule

This menu allows you to specify when the Wireless NVR records video and define the recording mode for each
channel. The recording schedule lets you set up a schedule like, daily and hourly by normal (continuous) recording,
motion recording. To set the recording mode, click first on the mode radio button (Normal, Motion), then drag the
cursor to mark the slots. The recording schedule is valid only for one channel. If you want to use the same recording
schedule for other channels, use Copy To function.
Channel: Select the channel to set its recording parameters.
Normal: When the time slot is marked green, this indicates the channel performs normal recording for that time slot.
Motion: When the time slot is marked yellow, this indicates the channel records only when a motion is detected
during that time slot.
NOTE: To use the motion detection, you must enable and configure the motion settings for the channel in Alarm
menu. Please see 5.6.1 Motion
No Record: A time slot marked black means that there is no recording scheduled for the time slot.
24
26