CONCORD QV5200 Manual page 47

Chapter 6 Channel Setup
6.8 PIR Setup
The PIR setup menu uses a line drawing method to determine the area. Simply click on a point to start the shape of the Thermal Detect is active, drag the
yellow line across to a point that will form a corner of the detection area, release the mouse button and then click and drag to the next point, repeat this
process five times until you have drawn the shape you require to cover the area you wish to detect within. There are six points that you need to connect so
you are not limited to simply drawing a four sided rhombus, when complete click in the red square and the lines will turn red indicating the active area.
6.9 Intelligent Set-up
When using 4K cameras with a Network Video Recorder there are a number of functions that become available to you; however these functions,
although visible on some menus are not available with Digital Video Recorders.