Enabling And Configuring The Dmx Output Via Art-Net Or Sacn; Setting Art-Net Or Sacn Universe And Priority - SHOWTEC Lampy 20 User Manual

Showtec LAMPY Series
8.5.2.12.

Enabling and Configuring the DMX Output via Art-Net or sACN

Art-Net and sACN are two popular protocols to transmit DMX data via ethernet. LAMPY supports both
protocols and enables you to configure both of them independently.
Note: You need a LAMPY DNGL (order code 50737), which may be either purchased separately or comes
factory installed in the 2-universe versions of the console.
You may enable or disable DMX Output via network protocols as follows:
01) Open the setup menu.
02) Change to the Show Settings view.
03) Scroll down to Output Settings.
04) Set the on-screen switch for Art-Net or sACN to on or off.
Fig. 64: Show Settings – DMX Output Configuration

Setting Art-Net or sACN Universe and Priority

If you want to change the Art-Net and / or sACN mapping, please double-tap or long-tap the
corresponding cell of the DMX Output Mapping table.
A dialog box will open asking you to input a new universe or priority number. Tap Enter when done.
Product: 50733 / 50734 / 50735 / 50736
65