Assembly; Switching On/Off; Operating Instructions - Parkside PAS 1200 B2 Translation Of The Original Instructions

Assembly

Disconnect at the plug before carry-
ing out any work on the equipment.
Risk of electric shock!
dy pre-assembled before initial use.
1
inverted container cover (10).
2
tightly in a clockwise direction.
The folded
16
must rest on
the container
cover (10). Then press down the
switch of the safety switch (17).
(16) must be on top of the safe-
ty switch (17).
If the safety switch (17) is not
pressed down, the appliance can-
not be started.
C D
3. Place the container cover (10)
on the metal container (13) and
lock it with the locking clips (9).
M N O
(10), you must ensure that the on/
W X Y
off switch (
nection (11) are roughly aligned to
each other or the container cover
cannot be put on correctly.
4. Connect the suction hose (14).
To do this, insert the rotatable
plastic end piece (with the
printed symbol) into the hose
connection (11) and screw it
tight (bayonet connection).
16
16
E F G
P Q
Z
8) and the hose con-
If correctly installed, the symbol on
the suction hose (14) points upwards.
When assembling/detaching the
suction hose (14), hold the black
plastic end piece and not the suc-
tion hose (14). Twisting or bending
could damage the hose.
5. Plug the suction tube (15) onto
16

Switching on/off

Connect the mains plug.
17
The appliance is equipped with a
safety switch (
Switching On:
On/Off Switch (see
Switching Off:
On/Off Switch (see
H I

Operating Instructions

The vacuuming of glowing
R S
embers and of materials that
are combustible, explosive or
harmful to health is prohib-
ited. There is a risk of injury!
• Place the equipment on a level surface
that is not heat sensitive.
• Always use the suction tube (
vacuuming. In case of minor contami-
nation, hold the suction tube (
large ash volumes by directly immersing
the suction pipe.
the rigid end piece of the suc-
tion hose (14).
17) that permits
16
8) In position "I"
8) In position "0"
J
T
1
GB IE
15) for
15)
21