Cleaning The Fi Lling Valve - Powerfix Profi PPR 1 A1 Operating Instructions Manual

♦ Immerse the intake pipe
forth about fi ve times.
♦ Now remove the intake pipe
♦ Immerse the fi lling valve
pull/push the plunger
♦ Then remove the paint roller bracket
♦ Immerse the fi lling valve
back and forth again about fi ve times.
♦ Undo the large cap nut from the knob and pull the plunger
cylinder
♦ For long-term storage, please grease the O-rings on the front of the plunger
and the seals on the paint roller bracket
example.
Cleaning the fi lling valve
♦ Undo the cap nut
♦ Remove the lock washer
♦ Clean the individual parts with water.
♦ Replace the rubber valve
♦ Screw the cap nut
PPR 1 A1
in water and pull/push the plunger
from the fi lling valve
and the paint roller bracket
back and forth again about fi ve times.
completely in water and pull/push the plunger
. Clean all parts with water.
on the fi lling valve
D
and the rubber valve
E
and the lock washer
F
fi rmly onto the valve housing again.
D
.
in water and
.
out of the paint
evenly with petroleum jelly, for
by turning it anticlockwise.
from the valve housing.
F
.
E
D
E
F
back and
GB
29