After Use; Cleaning And Maintenance - Silvercrest SDB 1500 B2 Operating Instructions Manual

After use

1) Allow the appliance to cool down.
2) Remove the pad for hard floors
3) Remove the water tank
4) Pull the upper cable hook
cable around the two cable hooks
Fix the end of the power cable using the cable clip on the cable.
5) Pull the dust container
dust container

Cleaning and maintenance

RISK OF ELECTRICAL SHOCK!
► Always remove the mains power plug before cleaning the appliance!
WARNING – RISK OF INJURY!
► Allow the appliance to cool down before cleaning it. Risk of burns!
CAUTION – PROPERTY DAMAGE
► Do not use abrasive or chemical cleaners, nor pointed or scratchy objects
to clean the appliance's surfaces.
■ Empty the water tank
■ After each use, remove the pad
it out.
■ Note the following washing instructions when you wash the pads
the washing machine:
■ If necessary, wipe the appliance with a damp cloth. For stubborn soiling use
a mild detergent on the cloth.
SDB 1500 B2
or the pad for soft floors
from the appliance and empty it.
out a little and turn it back upwards. Wind the
/ .
upwards out of the steam broom
. Reinsert the dust container
after every use.
/ from the steam broom
Wash at max. 60°C
Do not tumble dry
and empty the
into the steam broom
Do not iron
Do not bleach
GB │ MT
.
.
and wash
/ in
73 ■
│