Hartzell HC-E4 3 Series Owner's Manual page 106

CAUTION 1:
CAUTION 2:
CAUTION 3:
(2) With a suitable crane hoist and sling, carefully move the
propeller assembly to the aircraft engine mounting
flange.
(a) Some propellers may require installation of an
accessory drive pulley. If installation procedures
are not in this manual, refer to the aircraft
manufacturer's instructions.
INSTALLATION AND REMOVAL
Propeller Owner's Manual
WHEN INSTALLING HC-E5A-31
PROPELLERS, IT MAY BE NECESSARY
TO TEMPORARILY ADJUST/REMOVE THE
BETA RING SENSOR (IN ACCORDANCE
WITH THE APPLICABLE AIRCRAFT
MAINTENANCE MANUAL) TO PROVIDE
CLEARANCE FOR THE BETA RING.
FAILURE TO DO SO MAY RESULT IN
DAMAGE TO THE BETA RING AND/OR
THE BETA RING SENSOR.
WHEN INSTALLING THE PROPELLER
ON THE AIRCRAFT, DO NOT DAMAGE
THE ICE PROTECTION SYSTEM
COMPONENTS, IF APPLICABLE.
INSTRUCTIONS AND PROCEDURES
IN THIS SECTION MAY INVOLVE
PROPELLER CRITICAL PARTS. REFER
TO THE INTRODUCTION CHAPTER
OF THIS MANUAL FOR INFORMATION
ABOUT PROPELLER CRITICAL PARTS.
REFER TO THE ILLUSTRATED PARTS
LIST CHAPTER OF THE APPLICABLE
OVERHAUL MANUAL(S) FOR THE
IDENTIFICATION OF SPECIFIC
PROPELLER CRITICAL PARTS.
147
61-00-47
Rev. 16 May/20
Page 3-16