Hartzell HC-E4 3 Series Owner's Manual page 100

SEQUENCE A
Use Sequence A for steps one and two.
Step 1 - Torque all bolts/nuts to 40 Ft-Lbs (54 N•m). Step 3 - Torque all bolts/nuts
Step 2 - Torque all bolts/nuts to 80 Ft-Lbs (108 N•m).
SEQUENCE A
Use Sequence A for steps one and two.
Step 1 - Torque all bolts/nuts to 40 Ft-Lbs (54 N•m). Step 3 - Torque all bolts/nuts
Step 2 - Torque all bolts/nuts to 80 Ft-Lbs (108 N•m).
Torquing Sequence for Propeller Mounting Bolts/Nuts
INSTALLATION AND REMOVAL
Propeller Owner's Manual
A or B Flange
Use Sequence B for step three.
N, P or W Flange
Use Sequence B for step three.
Figure 3-3
61-00-47
147
SEQUENCE B
to Table 3-2.
SEQUENCE B
to Table 3-2.
Rev. 16 May/20
Page 3-10