Loading Pre-Punched Paper; Outputting Paper - Epson ET-5170 Series User Manual

Loading Paper
>

Outputting Paper

Loading Pre-punched Paper

Load a single sheet of pre-punched paper at the center of the rear paper feed slot with the printable side facing up.
Adjust the print position of your file to avoid printing over the holes.

Outputting Paper

❏ Printed paper is ejected to the output tray with the printed side facing down. For A4 size plain paper (with a
thickness of 80g/m²), up to 100 sheets can be ejected at a time. Outputting more than 100 sheets may cause
paper to fall or a paper jam to occur. Remove any excess paper so that it does not exceed the maximum number
of sheets that can be ejected.
❏ When you load thick paper, photo paper, or business card size paper, lower the output switch lever to output
paper to the front of the printer. We also recommend outputting envelopes to the front of the printer.
❏ Avoid touching the printed surface of the photo paper with your bare hands. Moisture and oils from your hands
can affect print quality.
33