Epson ET-5170 Series User Manual page 290

Administrator Information
❏ A computer (PC-FAX reception)
The above features can be used at the same time. If you use them at the same time, received documents are saved
to the inbox and on a computer. To receive faxes on a computer, make settings using FAX Utility.
"Making Settings to Send and Receive Faxes on a Computer" on page 291
1. Select Settings on the printer's control panel.
2. Select General Settings > Fax Settings > Receive Settings > Fax Output Settings.
3. If a confirmation message is displayed, confirm it, and then tap OK.
4. Select Save to Inbox.
5. Select Save to Inbox to set this to On
6. Select Options when memory is full, select the option to use when the inbox is full.
❏ Receive and print faxes: The printer prints all received documents that cannot be saved in the Inbox.
❏ Reject incoming faxes: The printer does not answer incoming fax calls.
7. You can set a password for the inbox. Select Inbox Password Settings, and then set the password.
Note:
You cannot set a password when Options when memory is full is set to Receive and print faxes.
Related Information
"Fax Output Settings" on page 257
&
"Viewing Received Faxes Saved in the Printer on the LCD Screen" on page 95
&
Making Settings for Blocking Junk Faxes
You can block junk faxes.
1. Select Settings on the printer's control panel.
2. Select General Settings > Fax Settings > Basic Settings > Rejection Fax.
3. Set the condition to block junk faxes.
Select Rejection Fax, and then enable the following options.
❏ Rejection Number List: Rejects faxes that are in the Rejection Number List.
❏ Fax Header Blank: Rejects faxes that have blank header information.
❏ Unregistered Contacts: Rejects faxes that have not been added to the contact list.
4. Tap
to return to the Rejection Fax screen.
5. If you are using the Rejection Number List, select Edit Blocked Number list, and then edit the list.
>
Settings to Use the Printer
290
>
Making Fax Features Available