Advertisement
Machine-Information Screen
This screen contains the following information:
•
The machine model and serial number
•
The number of engine hours for the machine
•
The number of drilling fluid-gallons used and the number
of re-settable drilling-fluid (mud) used
Note: Press button 3 to reset the number of drilling-fluid
(mud) gallons since the last reset
Machine-information Screen
1. Model and machine serial
number
2. Number of engine hours
3. Total number of
drilling-fluid (mud) gallons
used and re-settable
drilling-fluid (mud) gallons
used
(Figure
9).
(Figure
(Figure
9).
(Figure
9).
Figure 9
4. Reset drilling-fluid (mud)
gallons used
5. Previous screen
Lubrication and Maintenance Screens
These screens provide the user with the daily maintenance
schedule and at the 50-hour, 250-hour, 500-hour, and
1,000-hour increments.
9).
Note: Press the ESC button to exit this screen.
The daily maintenance screen will display once. To access the
screen again, turn the machine off and on again.
Press the following button to attain the subsequent
maintenance schedule:
•
Button 1—50-hour maintenance schedule
•
Button 2—250-hour maintenance schedule
•
Button 3—500-hour maintenance schedule
•
Button 4—1,000-hour maintenance schedule
50
1
2
250
500
3
1000
4
g029841
E S C
Main Maintenance Screen
50-Hour Maintenance Screen
5
(Figure
(Figure
(Figure
(Figure
0
DAIL Y
CHECK ENGINE CRANKCASE OIL
CHECK ENGINE COOL ANT L EVEL
0
CHECK HYDRAUL IC OIL L EVEL
CHECK FUEL L EVEL
CHECK M UD PUM P CRANKCASE OIL
CHECK ROT ARY BOX OIL L EVEL
0
INSPECT FOR L EAKS
GREASE
CHECK T RACK T ENSION
CARRIAGE PL ANET ARY GEARBOX OIL
0
ESC for BACK
OK to e nte r P IN
OK
Figure 10
Figure 11
11)
12)
13)
14)
5
6
7
8
g0298 48
g029848
g029849
Advertisement
