Advertisement
Collision Condition Indicator Screen
Software Versions K and up Only
The carriage stops and the icon displays when there is a
collision condition between the drill head and the pipe/arm
loader
(Figure
27).
Note: The icon for button 8 is only for software versions
K and up .
Figure 27
1. Collision condition icon
To clear the collision warning icon, press and hold the
override button
(Figure
28) while moving the carriage or the
cam.
Figure 28
Pipe-Setting-Selector Screen
Software Versions T and up Only
This screen allows you to reduce the number of operations
to load pipe.
To access this screen, press button number 1 on the
Operating Screen (page 1)
Displayed in the Pressure Screen (page
•
Button 2: Push Pipe
•
Button 3: Neutral
•
Button 4: Pull Pipe
g029913
1. Pipe setting selector
g201447
12
or the
Main Drill Functions
2).
Figure 29
Main
g035948
Advertisement
