Advertisement
Carriage-Pressure Screen
To access this screen, press the down arrow on the
Functions Displayed in the Torque Screen (page
When this screen appears, the carriage-pressure selection
(button 7) is in the O
position (green) or O
N
as shown in
Figure
7.
1. Selected maximum thrust
2. Carriage-pressure limiting
- The icons will be red
when the thrust limiting is
off and green when the
thrust limiting is on.
3. Increase the maximum
carriage pressure
Main Drill
2).
position (red),
FF
Figure 7
4. Decrease the maximum
carriage pressure
5. Air-hammer control
6. Joystick mode selection
Control-Select Screen
Access this screen by selecting Switch Joystick Functions
from the
Carriage-Pressure Screen (page
The 2 control layouts that the operator can choose from
consist of the following:
•
Mode I—places the drilling functions on right joystick,
while the left joystick operates the pipe loader and the
wrench functions
Press button number 4 to select this mode
•
Mode II—splits the drilling, wrench, and pipe loading
between the left and right joysticks
Press button number 8 to select this mode
g021248
1. Mode I
4
4).
(Figure
8).
(Figure
Figure 8
Control-Select Screen
2. Mode II
(Figure
8).
8).
(Figure
8).
g021202
Advertisement
