Advertisement
Pipe-Row-Selector Screen
Software Versions K and up Only
This screen allows you to select the row of pipe(s) that you
want to use.
To access this screen, press button number 8 on the
Operating Screen (page
1).
To select your pipe row, perform the following:
1. Press the right or left arrow to select the row number
to the row you want to access
Figure 25
Pipe-row-selector Screen
1. Row selector
2. Row number
3. Hide the side window
2. After placing the arrow beneath the row number you
want to access, press the 8 button
the side window.
Main
(Figure
25).
g029859
4. Right arrow
5. Left arrow
(Figure
25) to hide
Loader-Cam-Calibration Screen
Software Versions K and up Only
To access this screen, press button number 1 on the
and Update Screen (page
This screen allows the user to set the row positions for the
pipe holder.
Press the following buttons to set the desired position:
•
Button 1—Set position 1
•
Button 2—Set position 2
•
Button 3—Set position 3
To set the load or unload position, press button number 5
(Figure
26).
Loader-cam-calibration Screen
1. Set position
2. Row number
If the calibration numbers are acceptable, Calibration
Complete displays on the screen. If the numbers are not, the
screen displays Calibration Fail.
11
7).
(Figure
26)
(Figure
26)
(Figure
26)
Figure 26
3. Loader cam not set (X in
circle)
4. Set load/unload position
Diagnose
g029858
Advertisement
