Persistent Systems Wave Relay MPU5 Basic Operator Manual page 41

!
IMPORTANT INFORMATION!:
To communicate with an MPU5, the computer must have an IP address in the same subnet
▶
mask as the MPU5's IP address.
For example, with a subnet mask of 255.255.255.0, the computer and MPU5 will be able
▶
to communicate if they share the same first three numbers in their respective IP addresses
(e.g. 10.3.1.10 and 10.3.1.254).
If the computer and MPU5 do not share a subnet mask, the computer and MPU5 will not
▶
be able to communicate.
If either the computer or MPU5 do not have an IP address in the same subnet mask, the
▶
computer and MPU5 device will not be able to communicate.
NO NDA REQUIRED
The export and/or the release of certain products, technology and software to non-US persons might
be subject to export restrictions. Please refer to the US export laws & regulations for details.
SOFTWARE SETUP: MANAGEMENT COMPUTER
03EN073 Rev. M
© 2010 - 2020 Persistent Systems, LLC – All Rights Reserved
PAGE 41 OF 176