Step 1: Setup Instrument - ECD OvenRIDER NL2+ Quick Reference Manual

STeP 1: SeTuP inSTRuMenT

1.
Open the M.O.L.E.® MAP software.
2.
Connect the M.O.L.E.® Thermal Profiler to the
computer.
3.
Make sure the M.O.L.E.® Power Pack battery is fully
charged. When a M.O.L.E.® Thermal Profiler is se-
lected, the software status bar displays the current
battery voltage.
4.
Set an OvenRIDER® NL 2+ Environment. Either
open an existing Environment Folder or create a
new one.
OPeRATiOn
④
③
SeTuP inSTRuMenT
14