ECD OvenRIDER NL2+ Quick Reference Manual page 22

OPeRATiOn
It is important to open the Thermal Barrier
to prevent the internal temperature of the
M.O.L.E.® Profiler to rise above operating tem-
perature specification.
7.
Open the Thermal Barrier and if the Record button is
still flashing this means the M.O.L.E.® Profiler is still
logging and it should be stopped.
8.
Remove the M.O.L.E.® Profiler from the Thermal
Barrier by pulling the extractor handle up. Wait a few
minutes for the M.O.L.E.® Profiler to cool. Handle it
carefully, as the case may still be warm.
If the M.O.L.E.® Profiler is removed before it
has stopped collecting data, it may cause the
data to become distorted.
dATA cOLLecTiOn
⑧
21
⑧