Assembling The Vacuum Cleaner; Using The Appliance - Domo DO7248S Instruction Booklet

DO7248S / DO7249S

ASSEMBLING THE vACUUM CLEANER

Assembling the hose
1. Insert the end of the hose with the black sleeve into the air intake opening.
2. Push the hose until it locks into place.
Disassembling the hose
1. Pull the plug out of the socket.
2. Press the ribbed sides of the black sleeve at the end of
the hose.
3. Remove the hose from the opening.
Assembling the telescopic tube
1. Remove the tube from the hand grip by pulling them apart.
2. Set the tube to the correct length. To do this, push the slide forwards and pull out
the lower part of the tube until you have reached the required length. Then let go
of the slide and let it snap into place.
3. Attach the floor nozzle to the tube.
4. Put the hand grip back into the tube.
1

USING THE APPLIANCE

Getting started
Before using the vacuum cleaner, first roll out a sufficient length of the
electric cord and plug it in. The yellow mark on the cord indicates the
maximum length, that must not be exceeded. To switch on the vacuum
cleaner press the on/off button (A) with your foot.
Vacuuming
With the suction power regulator you can choose the suction power as you require it.
We recommend to use the minimum suction power for vacuuming delicate materials.
The medium power is best for matresses, furniture and carpets. Select the maximum
power for tiles, wood and other robust floors.
2
38
3
A