Ceiling Mount Installation - 3M DX70i Operator's Manual

3M™ Digital Projector DX70i
Please note that
damage resulting
from incorrect
installation will
invalidate the
warranty.
If you buy the
ceiling mount
from another
manufacturer,
please ensure that
there is at least
10cm distance
between the
bottom cover of the
projector and the
ceiling.
Avoid placing
the projector
near sources
of heat such as
air-conditioning
units and heaters
otherwise it may
overheat and shut
down automatically.
© 3M 2008. All Rights Reserved.

Ceiling Mount Installation

1. To prevent damaging your projector, please use the ceiling
mount package for installation.
2. If you wish to use a third party ceiling mount kit, please
ensure the screws used to attached a mount to the projector
Screw type: M3
Maximum screw length: 10mm
Minimum screw length: 8mm
63.00
66.00
(To Lens Center)
126.00
Appendices
43