3M DX70i Operator's Manual page 34

User Controls
32
LAN
Press "Enter" to apply LAN settings. If the connection is successful,
the OSD display will show the following dialogue box.
Network State: To display network information.
DHCP:
Enable: Assign an IP address to the projector from the DHCP
server automatically.
Disable: Assign an IP address manually.
IP Address: Select an IP address.
Subnet Mask: Select subnet mask number.
Gateway: Select the default gateway of the network connected to
the projector.
DNS: Select DNS number.
Apply: Press "Enter" to apply the selection.
RS232 Port
RS232: Allows RS232 control of an individual projector.
Network: Allows LAN via web browser (Internet Explorer) to
control of projector. (Default setting)
Projector ID
control an individual projector by RS232. The related order please
refer page 44.
3M™ Digital Projector
© 3M 2008. All Rights Reserved.