Advertisement
NOTE: Unit can be fully programmed using battery
power only.
4. Reinstall unit by reversing step #1 above and con-
nect wires to unit as per suggested wiring dia-
grams. See illustration on enclosure label.
KEY FUNCTIONS
DAY
MONTH
MODE
DAY/MONTH: Press to advance the day in the CLK
and SKIP modes. Press to advance the month in the
DATE mode.
HOUR/DATE: Press to set the Hours in the CLK
mode and in the Schedule SET mode. Press to
advance date in the DATE mode.
MIN/YEAR: Press to set the Minute in the CLK mode
and in the schedule SET mode. Press to advance
Year in the DATE mode.
OVERRIDE: Press to execute or terminate a signal.
MODE: Press to advance to next mode without
affecting the display information. Sequence is: RUN,
CLK, DATE, schedule SET, SIG 1, SIG 2, Skip (SP).
In the SET mode, unit automatically reverts to the
RUN mode if no entries are made for a short peri-
od of time.
SP DAY: Press to set or delete SKIP days (those on
which no signal schedule is executed)
SIG/SEC: Press to select signal 1, signal 2, or no
event - or to set the duration of signals in seconds.
ENTER: Press to store the displayed information into
memory. Information will not be stored until
ENTER is pressed.
NOTE: During settings, each press of the key will
advance one number. For rapid advance, hold key in.
HOUR
DATE
SP
DAY
2
MIN
YEAR
SIG
SEC
OVER-
RIDE
ENTER
Advertisement
