14. Troubleshooting
Fault
Possible cause
Check whether the plug is
plugged in.
Check whether there is power
Motor does not
to the socket.
run
Check whether the vacuum
cleaner on/off switch is
switched on.
Is the brush blocked?
Reduced
vacuuming power
Is the dust bag full of dust?
Is the filter full of dust?
20
GB
www.scheppach.com service@scheppach.com +(49)-08223-4002-99 +(49)-08223-4002-58
Remedy
Plug the mains plug back in to the socket.
Call an electrician.
Switch the on/off switch on.
Switch the vacuum cleaner off to remove
the blockages.
Remove and empty the dust bag.
Remove and empty the filter.