Troubleshooting - Scheppach GKS20 Translation Of Original Instruction Manual

15. Troubleshooting

The following table shows fault symptoms and describes remedial measures in the event of your product failing to
work properly. If you cannot localise and rectify the problem with this, please contact your service workshop.
Fault
Engine does not run
Reduced vacuuming
power
22 | GB
Possible cause
Check whether the plug is plugged in.
Check whether there is power to the
socket.
Check whether the vacuum cleaner on/
off switch is switched on.
Device blocked?
The filter must be cleaned.
Is the filter full of dust?
www.scheppach.com
Remedy
Plug the mains plug back in to the socket.
Call an electrician.
Switch the on/off switch on.
Remove the blockage.
Clean the filter.
Remove and empty the filter.