Troubleshooting - Scheppach Capas 7.0 Translation From The Original Instruction Manual

Warning: In the interest of workplace safety, always turn the shaving machine off and unplug it before you begin repairs.
Trouble
Motor does not function.
Motor starts slowly and does not reach
the normal operating speed.
Motor does not perform well.
Motor overheated.
Reduced cutting performance.
In order to dispose of the machine, the local legal regulations must be followed.
Please ask your specialist store or the manufacturer.
Maintenance of the electrical elements of the machine should only be carried out by a specialist in the field.
When disposing of the machine all local regulations must be followed.
22 english

Troubleshooting

Possible Cause
Motor, cable or plug defective.
Fuses burned out.
Too little current.
Motor runs very loudly.
Motor defective.
Casing of the motor damaged.
Insufficient electricity (too many other
devices on the same source, such as
lamps or other motors, etc.).
Motor capacity exceeded.
Insufficient cooling of the motor.
Saw blade too small (too often
sharpened).
Saw blade is raw or bent.
Saw blade is dull.
Solution
Have a specialist examine the machine
Never attempt to repair the machine
yourself! Danger of Injuries.
Check fuses and replace as necessary.
Have the electrical supplier check the
current flow.
Have a specialist check the motor.
Have a specialist exchange the
condenser.
Have a specialist check the motor.
Reduce the number of units on the
same circuit.
Avoid exceeding the capacity when
cutting.
See that no dust or dirt covers the
motor and that the motor is placed
with sufficient distance to other
objects.
Replace final element of the saw unit
with a new unit.
Install a more suitable saw blade.