Table of Contents
Related Manuals for J-Tech Digital UHDT150
Summary of Contents for J-Tech Digital UHDT150
- Page 1 Operating instructions Website:www.jtechdigital.com TollFree:1-888-610-2818 Email:support@jtechdigital.com USER MANUAL J-Tech Digital® 492Ft/150M HDBaseT 4K Extender Supports 4K/60Hz 4:4:4 HDR Model: JTECH-UHDT150 JTD-ID: 614...
-
Page 2: Table Of Contents
Thank you for purchasing this product For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please retain this manual for future reference. Surge protection device recommended This JTD-614 contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lighting strikes, etc. -
Page 3: Introduction
1. Introduction This 18Gbps HDMI Extender transmitter receiver set lets you "extend" the distance between your HDMI source and display devices by up to 492ft./ 150m via a single Cat 5e/6 Ethernet cable. Integrated HDBaseT technology maintains signal stability and quality, reducing signal loss and latency. HDMI 2.2 and HDCP 1.4 compliant, this HDMI extender set supports a wide range of video resolutions (up to 4Kx2K@50/60Hz 4:4:4) and HD audio formats (including LPCM 2.0, Dolby Digital, Dolby TrueHD, Dolby Digital Plus,... -
Page 4: Package Contents
3. Package Contents Qty Item 18Gbps HDMI over HDBaseT Extender (Transmitter) 18Gbps HDMI over HDBaseT Extender (Receiver) IR Blaster cable (1.5 meters) 20~60KHz IR Receiver cable (1.5 meters) Mounting Ears 3-pin Phoenix connectors 24V/1A Locking Power adapter User Manual 4. Specifications Technical HDCP Compliance HDCP 2.2 / HDCP 1.4 Video Bandwidth... - Page 5 Connection Input: 1x HDMI Type A [19-pin female] Outputs: 1x HDMI Type A [19-pin female] 1x HDBT OUT [RJ45, 8-pin female] Transmitter Controls: 1x IR IN [3.5mm Stereo Mini-jack] 1x IR OUT [3.5mm Stereo Mini-jack] 1x RS-232 [Phoenix jack] 1x SERVICE [Mini-USB, Update port] Input: 1x HDBT IN [RJ45, 8-pin female] Outputs: 1x HDMI Type A [19-pin female]...
-
Page 6: Operation Controls And Functions
5. Operation Controls and Functions 5.1 Transmitter Panel SERVICE HDMI OUT HDMI IN IR IN IR OUT Name Function Description Power LED Red LED indicates that the transmitter is powered on. SERVICE port Firmware update port. DC 24V/1A power supply input port. Note that the extender supports PoC function, it means that either DC 24V transmitter or receiver is powered on by 24V/1A power adapter, the... -
Page 7: Receiver Panel
3-pin Phoenix connector for RS-232 command transmission. RS-232 The RS-232 command will pass-through from transmitter to receiver or from receiver to transmitter. 5.2 Receiver Panel SERVICE HDMI OUT AUDIO OUT IR IN IR OUT Name Function Description Power LED Red LED indicates that the receiver is powered on. SERVICE port Firmware update port. -
Page 8: Ir Pin Definition
IR IN IR input port for receiving the signal of IR remote. IR output port for control of display device. This IR output signal IR OUT is from the IR IN port of transmitter. 3-pin Phoenix connector for RS-232 command transmission. RS-232 The RS-232 command will pass-through from transmitter to receiver or from receiver to transmitter. - Page 9 Bi-directional IR control system diagram: TV remote DVD remote IR Receiver cable CAT 5e/6 cable HDMI OUT HDMI IN IR IN IR OUT HDMI OUT AUDIO OUT IR IN IR OUT Transmitter Receiver IR Blaster cable Note: When the angle between the IR receiver and the remote control is ± 45 °, the transmission distance is 0-5 meters;...
-
Page 10: Application Example
6. Transmitter/Receiver Connection and Set Up Diagram: RS-232 DC 12V Controller DVD or Blu-ray Player Transmitter IR IN IR OUT HDMI OUT HDMI IN IR Blaster Power Supply IR Receiver IR Receiver CAT 5e/6 cable UHDTV IR Blaster Receiver HDMI OUT AUDIO OUT IR IN IR OUT... - Page 11 Specifications, pictures & software described herein are subject to change without prior notification. Only use the provided power supply when operating this unit. J-Tech Digital® is not responsible for any damage due to customer neglect. All trademarks are the sole property of their respective companies.