4 Click the selector arrows to the right of the Configure: drop
down menu and select Using DHCP Server. Then click
Options....
The TCP/IP Options screen appears.
Note: In some cases, the Load only when needed checkbox
does not appear. If it is visible, make sure that the box is
not checked. If a check mark appears in the box, click the
box to remove it.
5 Select Active and click OK.
6 Verify that the Use 802.3 checkbox (circled in the image
below) is unchecked. If the box is checked, click the box to
remove the check mark. Then click Info.
Configuring the TCP/IP Protocol
9