Set Up Wpa2-Enterprise Security On A Satellite Or Client Bridge - NETGEAR Insight Instant AirBridge User Manual

Your settings are saved to be applied later. The page closes. The Wireless Settings
page displays again.
A pop-up window opens. The window shows the number of changes to be applied.
You can either make more changes (also on other pages) or apply the changes now.
10. To apply the changes now, click the Apply button in the pop-up window.
Your changes are applied immediately. If the WiFi link must be reestablished, the
page displays the number of seconds before the AirBridge is back online.
Set up WPA2-Enterprise security on a satellite or client
bridge
Use this task if the selection from the Operation Mode menu is AirBridge Satellite or
Client Bridge.
When you set up WPA2-Enterprise security on a satellite or client bridge, you must
specify the same RADIUS server authentication settings that you specify on the master
or access point.
Note: For a client bridge, you can also set up WPA-Enterprise if the link partner is not
an AirBridge functioning as an access point but another type of access point that supports
WPA-Enterprise.
To set up WPA2-Enterprise security on a satellite or client bridge:
1. Open a web browser from a computer that is connected to the same network as the
AirBridge or directly to the AirBridge through an Ethernet cable or WiFi connection.
2. Enter the IP address that is assigned to the AirBridge.
The login page displays.
If your browser does not display the login page but displays a security message and
does not let you proceed, see Log in to the AirBridge after initial setup on page 31.
3. Enter the AirBridge user name and local device password.
The user name is admin. The local device password is the one that you specified
the first time that you logged in. The user name and password are case-sensitive.
If you previously managed the AirBridge through the NETGEAR Insight app or Insight
Cloud portal, enter the Insight network password for the Insight network location to
which the AirBridge was assigned (see Connect over WiFi using the NETGEAR Insight
App on an iOS or Android mobile device on page 13).
The Device Status page displays the Device Information section and other sections.
4. Under Network, select Wireless.
Manage the WiFi and Radio
Features
Insight Instant AirBridge WBC502 User Manual
71 User Manual