Change The Language Of The Local Browser Ui - NETGEAR Insight Instant AirBridge User Manual

The Device Status page displays the Device Information section and other sections.
The following figure shows the Device Status page and the Device Information section.
For more information about the sections on the Device Status page, see View the device
status and other information on page 120.

Change the language of the local browser UI

You can change the language of the local browser UI.
To change the language of the local browser UI:
1. Open a web browser from a computer that is connected to the same network as the
AirBridge or directly to the AirBridge through an Ethernet cable or WiFi connection.
2. Enter the IP address that is assigned to the AirBridge.
The login page displays.
If your browser does not display the login page but displays a security message and
does not let you proceed, see Log in to the AirBridge after initial setup on page 31.
3. Enter the AirBridge user name and local device password.
The user name is admin. The local device password is the one that you specified
the first time that you logged in. The user name and password are case-sensitive.
If you previously managed the AirBridge through the NETGEAR Insight app or Insight
Cloud portal, enter the Insight network password for the Insight network location to
Access the AirBridge and Use
the Easy Setup Method
Insight Instant AirBridge WBC502 User Manual
32 User Manual