View The Cpu Load On The Airbridge - NETGEAR Insight Instant AirBridge User Manual

you blocked the WiFi device. This ACL denies access to the WiFi device but allows
access all other WiFi devices. (For more information, see Set up a MAC filter for
a 5 GHz SSID on page 89.)
A pop-up window opens. The window shows the number of changes to be
applied. (The automatically-created ACL is not saved until you click the Apply
button.) You can either make more changes (also on other pages) or apply the
changes now.
c. Click the Apply button.
Your settings are saved and applied immediately. The WiFi connection is
reestablished. The page displays the number of seconds before the AirBridge
is back online.

View the CPU load on the AirBridge

You can view the CPU load on the AirBridge.
To view the CPU load:
1. Open a web browser from a computer that is connected to the same network as the
AirBridge or directly to the AirBridge through an Ethernet cable or WiFi connection.
2. Enter the IP address that is assigned to the AirBridge.
The login page displays.
If your browser does not display the login page but displays a security message and
does not let you proceed, see Log in to the AirBridge after initial setup on page 31.
3. Enter the AirBridge user name and local device password.
The user name is admin. The local device password is the one that you specified
the first time that you logged in. The user name and password are case-sensitive.
If you previously managed the AirBridge through the NETGEAR Insight app or Insight
Cloud portal, enter the Insight network password for the Insight network location to
which the AirBridge was assigned (see Connect over WiFi using the NETGEAR Insight
App on an iOS or Android mobile device on page 13).
The Device Status page displays the Device Information section and other sections.
4. Under Overview, select Realtime.
The page that displays shows the CPU load. By default, the Load tab is selected.
The CPU load is displayed as a graph, which is updated every three seconds and
covers a maximum period of three minutes.
The page also displays the current load, average load, and peak load, each of which
is expressed as a percentage and is measured during the previous three minutes.
Monitor the AirBridge and its
Network Connections
Insight Instant AirBridge WBC502 User Manual
126 User Manual