Securing The Mount Base; Figure 4-3 Securing The Mount Base - Hitachi IR.Station Hardware Manual

4 INSTALLATION

4.3 Securing the Mount Base

Fasten the mount base to a vertical surface of the enclosure. Do not install mount base
upward, downward, or sideways. The modules are designed to produce optimum heat
dissipation effects when they are fastened to a vertical plane of the cubicle.
Fasten the mount base to a vertical plane of the cubicle. If mount base is
fastened to a horizontal plane, the heat dissipation effects lowers thereby it may
cause a defection and incur deterioration in component parts.
M5 15
Cubicle
CPU unit
I/O unit
Fasten the mount base to a
vertical plane of the cubicle.

Figure 4-3 Securing the Mount Base

CAUTION
- 22 -
M5 15