Crestron FT2A-CBLR-BRKT-202 Quick Start

FT2A-CBLR-BRKT-202/FT2A-CBLR-BRKT-700
Front/Rear Bracket for One Cable Retractor for FT2-202 and FT2-700 Series
The Crestron® FT2A-CBLR-BRKT-202 and FT2A-CBLR-BRKT-700 brackets mount below the
surface to the front or rear face of the FT2-202 series and FT-700 series of FlipTop™ Cable
Management Systems, respectively. Each bracket provides slots to accommodate one cable
retractor and one power supply holder. The bracket enables a cable retractor to occupy a
center module position inside the FlipTop.
Check the Box
Item
FT2A-CBLR-BRKT-202 or FT2A-CBLR-BRKT-700 (P/N 6510692 or 6510690)
Bracket, 6.875" x 3.6"
Screw, 10-32 x 5/16", SEMS, Pan Head, Phillips (P/N 2007287)
Install the Bracket
NOTE: Up to two brackets (front and rear) can be installed on the larger FT2-700 series
FlipTop. A single bracket can be installed to either the front or rear of the FT2-202 series
FlipTop.
Determine whether to install the bracket to the front or rear face of the FlipTop. Using a
#2 Phillips screwdriver, position the bracket against the FlipTop and secure with two screws
(provided). Use the following drawings for visual reference.
Front Bracket Installation - FT2-202 Series FlipTop
(2) Screws Bracket
(included) (included)
Qty
FT2-202 Series
FlipTop
Rear Bracket Installation - FT2-202 Series FlipTop
1
2
FT2-202 Series
FlipTop (included)
Front Bracket Installation - FT2-700 Series FlipTop
(2) Screws
(included)
Bracket (2) Screws
(included)
Bracket FT2-700 Series
(included) FlipTop
Quick Start