Summary of Contents for Infineon Cypress S6SATU01A Series
Page 1
The document following this cover page is marked as “Cypress” document as this is the company that originally developed the product. Please note that Infineon will continue to offer the product to new and existing customers as part of the Infineon product portfolio.
Page 2
S6SATU01A C Interface for PMIC Communication Tool Operation Guide Doc. No. 002-08680 Rev. *B Cypress Semiconductor 198 Champion Court San Jose, CA 95134-1709 www.cypress.com Arrow.com. Arrow.com. Downloaded from Downloaded from...
Page 4
Preface This manual explains how to use the evaluation board. Be sure to read this manual before using the product. For this product, please consult with sales representatives or support representatives. Handling and use Handling and use of this product and notes regarding its safe use are described in the manuals. Follow the instructions in the manuals to use this product.
Page 5
Cautions Caution of the products described in this document The following precautions apply to the product described in this manual. Indicates a potentially hazardous situation which could result in death or serious injury and/or a fault in the user’s system if the product is not used correctly. WARNING Before performing any operation described in this manual, turn off all the power supplies to the Electric shock,...
Page 6
Cautions When turning the power on or off, follow the relevant procedure as described in this document. Before turning the power on, in particular, be sure to finish making all the required connections. Damage Furthermore, be sure to configure and use the product by following the instructions given in this document.
Contents Description ..................................7 Pin Descriptions ................................8 Input/output pin descriptions ..........................8 Jumper, Switch descriptions ..........................9 Setup and Verification ..............................10 Contents in a Package ............................10 Evaluation with I C control ........................... 11 3.2.1 PC Setup ..............................11 3.2.2 Operation check............................
1. Description The S6SATU01A is communication tool for 2ch Buck + 1ch Buck/Boost DC/DC, S6SAP412A and for 3ch Buck + 1ch Buck/Boost DC/DC, S6SAP413A. This board implements our MCU : FM3(MB9AF312K) and can communicate with I C easily by using windows PC and prepared software. It can select the output voltage, soft-start time, ON/OFF sequence, PFM/PWM mode.
2. Pin Descriptions Input/output pin descriptions Table 2-1. Input/output Pin Descriptions Block Pin symbol Function description Ground terminal VBUS VBUS terminal USB_VCC USB_VCC terminal I2CVCC Power supply terminal for I SCL_S C clock terminal SDA_S C data I/O terminal MCU I/O port (25pin) JP110 GND through JP110 MCU I/O port (26pin)
Pin Descriptions Jumper, Switch descriptions Figure 2-1. Jumper, Switch Descriptions Jumper, Initial Description Switch setting JP101 Short CN103 (2pin) and MCU I/O port (4pin) Solder Short JP102 Short CN103 (3pin) and MCU I/O port (3pin) Solder Short JP104 Short VBUS and VCC Solder Short JP105 Short VCC and I2CVCC...
3. Setup and Verification Contents in a Package Contents Description Quantity Notes S6SATU01A C Communication board USB cable USB to USB mini B cable L-Angle connector Connector for PMIC board [Using items for evaluation with I C control] S6SATU01A 1pic ...
Setup and Verification Evaluation with I C control Any setting of S6SAP412A/S6SAP413A can be evaluated with Windows PC connected to USB port by I communication GUI. 3.2.1 PC Setup Unpack the driver file to a folder of PC running Windows 7 or later version OS, and run install.bat file. Connect S6SATU01A to PC using USB cable.
Setup and Verification Please unplug the USB cable after setup. 3.2.2 Operation check Connect the S6SATU01A and S6SAP412A/S6SAP413A. 3.3V is applied to VIN terminal of S6SAP412A/S6SAP413A. USB cable is connected. Run I C communication software and click the box of ON/OFF field. Click the WRITE DATA button.
Setup and Verification 3.2.3 How to use I C communication GUI S6SATU01A I C Interface for PMIC Communication Tool Operation Guide, Doc. No. 002-08680 Rev. *B Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Downloaded from Downloaded from Downloaded from...
Revision History Document Revision History Document Title: S6SATU01A I C Interface for PMIC Communication Tool Operation Guide Document Number: 002-08680 Revision Issue Date Origin of Description of Change Change 07/22/2014 MITK Initial release 02/04/2016 MITK Migrated Spansion Guide from S6SATU01A_SS901-00027-1v0-E to Cypress format 11/30/2017 MASG Adapted Cypress new logo.