Dantherm HCV 400 P1 Service Manual page 5

Overview, continued
EN 55014-2:1997
EN 301489-1:2011
EN 301489-3
EN 300220-1:2001
EN 300220-2:2017
EN 300220-3:2001
Skive, 20 .07 .2018
Recycling
This unit is designed for long term durability . When total lifetime ends, the unit should be
recycled according to national rules and with high environmental protection considerations .
Abbreviations in
This manual uses the following abbreviations for ventilation terminologies .
this manual
Abb .
T1
T2
T3
T4
S1
S2
S3
S4
Mode A
Mode B
G4
F7
BP
IP
DHCP
PC
USB
LAN
WAN
BMS
PCB
FFC
Electromagnetic compatibility - Requirements for household appliances
- Part 2
Electromagnetic compatibility (EMC) standard for radio equipment and
services; Part 1
Electromagnetic compatibility (EMC) standard for radio equipment and
services; Part 3
Electromagnetic compatibility & Radio spectrum Matters (ERM);
Short Range Devices
Electromagnetic compatibility & Radio spectrum Matters (ERM);
Short Range Devices
Electromagnetic compatibility & Radio spectrum Matters (ERM);
Short Range Devices
Description
Outside air coming into the unit
Supplied air from the unit to the home (heated in the heat exchanger)
Extract . Evacuated, stale and warm air .
Exhaust air from the unit (cooled in the heat exchanger)
Temperature sensor no 1
Temperature sensor no 2
Temperature sensor no 3
Temperature sensor no 4
Indicating operation mode A where T2 and T3 are on the left side of the top of the
unit .
Indicating operation mode B where T2 and T3 are on the right side of the top of
the unit .
Standard air filter
Fine filter, pollen filter (additional equipment)
Bypass damper (prevents overheating of the home on hot days)
Unique address for the Ethernet port .
Automatic settings of an Ethernet address provided from an external network
component ( if connecting the unit to Ethernet)
Personal computer running MS Windows
Universal serial bus connection
Local area network
Wide area network (internet)
Building Management System
Print Circuit Board
Flat Flexible Cable
5