Dantherm HCV 400 P1 Service Manual page 17

Installation options, continued
8
9
10
11
Insuficient device performance and ventilation effect
Warning
CAUTION
• Any wired accessory must be swopped/ installed according to the current operating
mode A/B .
Caution
Swop the drain hose and plug as
indicated .
For a further description of the
drain hose installation, see page
20 .
Swop the filter (ONLY if the addi-
tional pollen filter F7 is used) .
• Check the table on page 8
in order to determine the right
position of the F7 filter during
mode A/B .
Connect the duct as specified on the label and described on page 20 .
Calibrate the unit as described on page 22 .
Mode A Mode B
17