Uninstalling The Pc Card And Driver - 3Com OfficeConnect 3C3SH573BT User Manual

Uninstalling the PC Card and Driver

Sometimes previous or unfinished installations leave problems that affect PC Card operation. If the PC Card
installation is unsuccessful for any reason, your best course may be to remove the PC Card and its software and
repeat the installation procedure. Possible problems may be indicated if:
The PC Card is not working.
I
Windows NT is not detecting the PC Card.
I
The system issues a warning tone at startup.
I
If you are having any of these problems, follow the procedure below:
1 Remove the PC Card from the PC Card slot.
2 Select My Computer/Control Panel/Network/Adapters.
3 Select FE573B-3Com 10/100 LAN CardBus-Fast Ethernet and click Remove.
4 Reboot and reinstall the PC Card and its drivers.
This procedure removes the PC Card and its software only. If you choose to remove all networking components,
remember to use the setup procedure described in "Installing the Driver With No Networking Installed" on
page 15.
Uninstalling the PC Card and Driver
19