Honeywell CentraLine EAGLEHAWK NX User Manual page 22

BASIC OPERATION PROCEDURES
EN2Z-1053GE51 R0119
18. To adjust lower or higher digits, do not pre-save the value by pushing the
rotate&push button, instead turn the rotate&push button clockwise or
counterclockwise to display the higher or lower digits. Depending on the turn
direction, the first, second and proximate digits after or before the decimal
point will be displayed and can be adjusted (see following examples).
19. Change the lower or higher digits in the same way by turning the rotate&push
button, and then by pushing the rotate&push button.
20. Push the rotate&push button to pre-save the value.
The changed value is highlighted.
21. To finally save a value, turn the rotate&push button to navigate to and
highlight the OK command at the bottom of the screen.
22. Push the rotate&push button.
The day with the changed values is redisplayed.
22
EAGLEHAWK NX CONTROLLER